Apex Peptides
Results 1 to 11 of 11
  1. #1
    RThoads's Avatar
    Join Date
    Sep 2015
    Posts
    204
    Rep Power
    43

    Post Basicstero introduction

    Hey guys! Thank you for having us here on Muscle and Science.

    Let me introduce Basicstero!

    www.basicstero.ws

    Production Video:



    Pharmacom Labs has worked with and continues to work with resellers. However, our boss decided to open a direct store of Pharmacom labs company without extra links in the chain. Its address is www.basicstero.ws. Hence, we are not intermediate suppliers; we officially represent the Pharmacom Labs company! Due to the fact we are a direct store our prices are cheaper than our resellers. You can check the authenticity of the Basicstero.ws store by entering “basicstero.ws” in the respective section on Pharmacom Labs official site. All products come directly from the manufacturer!

    Pharmacom Labs company was founded in 2006 on a base of a small existing pharmaceutical factory in Moldova. Steroid production is legal there. During the first years we produced our products there. Later we moved our manufacturing facilities to China due to economic reasons; the production expenses in China are lower and raw materials are always at hand which means there is no need to transport them or deal with customs etc.

    Now we are a big lab with a lot of modern equipment. We guarantee the high quality of our products.
    There are several advantages of our company as compared to other manufacturers.


    What You Should Know About Our Products?

    1. We check filling settings of our production lines before we start to produce each new batch. Each ml of our oils as well as each pill contains the displayed quantity of the raw material. You can check our products via lab analyses such as HPCL and you will assure yourself of our quality.

    2. We always add a bit more than 10 ml oil in each vial. We consider the small oil amount that stays in the needle after injection. Hence, we provide approximately 10.5 ml oil in each vial.

    3. We don`t have underdosed vials or pills! As you can see in our production videos, our production line is fully automated. We recheck our equipment settings before we launch each new batch. All settings for each vial or pill within one batch are equal. If one vial was underdosed, it would mean that all other vials from this batch are underdosed too, which is just impossible as can be seen by the many analysis results posted online.

    4. We pay huge attention to preservation of health, that`s why we carefully sterilize all our oils for intramuscular injections. When using our oils you can be 100% sure you will never catch staphylococcus or any other bacteria. Please read the separate text about it below!

    5. Grape seed oil is used as the carrier in all our vials. We also use 5 to 10% pharmaceutical grade ethyl oleate in our oils. As a result, injections are not painful and don`t cause big lumps, etc.
    (attention should be paid only with high concentrated oils 450-600 mg/ml! as these may cause irritation to less experienced users)

    6. Our products have lot of protection elements against counterfeits, especially protection codes, which can be checked in the respective section of our site. You will always know whether your vial is genuine or not.

    7. Our product range has unique compounds, which most other sources do not offer. For example, GW1516 (increases endurance greatly!); along with the regular stanozolol water suspension we produce oil-based stanozolol, which can be mixed with any oils and reduces the risk of abscesses. We offer injectable oxymetholone and methandienone (due to the missing first pass through the liver both have higher bioavailability = efficiency as compared against the oral versions). We have very interesting and extremely popular mixes line. We are now working on several other new compounds! Work is done all the time on developing new products, formulas, mixes, and enhancing the existing formulas!

    8. We test all our products internally on our volunteers before we launch them into the market. If some problems are reported, we improve the formulas to correct any issue and only after this start selling. You always get proven and safe products!

    9. In our vials we do not use rubber caps, which can be damaged from contact with oil over time! As a result, tiny particles off the rubber can break off when inserting the needle and fall into oil or get into the needle causing dangerous health consequences! Therefore, to eliminate these risks, instead of rubber we use silicon caps, which do not have this shortcoming and are oil-resistant!

    10. We take into account remarks of our customers. Everyone can write his or her suggestions and ideas to us and we will consider them! We have full support for our products and are always available and open for questions and new ideas!

    11. Our products have one of the best and most secured designs among all steroid manufacturers worldwide! All vials are supplied in original cardboard boxes with brief manuals inside and vials as hologrm security sticker that can be scratched off to reveal the product unique verification code.


    Why Choose Pharmacom Labs? What are some ways we are different than other labs?

    1. Oil, by nature, contains small water particles. When present in the cooking oil you use at breakfast there's little need for concern. But those same water particles present in an oil you are about to inject present a far greater problem. You might know what can happen if you attempt to mix 1ml of oil and 1ml of water for injection. But that's only the beginning, the water itself is also a very good medium for bacteria to reproduce - in stark contrast to sterile oil. Therefore, we put great care into oil dehydration to minimize all potential health risks however slim. Many cheap oil-based steroids cannot offer the same guarantee. Pharmacom Labs remains one of the few manufacturers that can offer these measures with high-performance equipment at a decent price!

    2. Are you aware of how and under what circumstances some other labs filter their final products? Syringe filters are often used in lesser quality labs, but they are not reliable; a proper filter would need to be at least 22 micrometers as a minimum. If you imagine the process of sieving oil through a filter of an average size to meet commercial demand, you would need at least 600 kPa of pressure. This is simply impossible without sufficient equipment, custom fit vacuum pumps or compressors designed for pharmaceutical use, a pressured air dryer, a large quantity of filters including cyclons. No labs selling cheap products possess this cost prohibitive professional equipment.

    3. Do you know if and how other manufacturers avoid double bond (olefinic bond) sequences in ethyl oleate? How do they avoid fast oxidation?
    This olefinic bond is the cause of a so-called "unsaturated condition" of EO - all unsaturated acids are highly attracted to all olefin-type combination reactions. Most labs use standard vials and rubber caps purchased from ordinary online supply stores. But ethyl oleate as a solvent can react with rubber causing its oxidation. With time, as you might have guessed, the rubber degrades.
    So we ask - how many manufacturers use a non-toxic, hypoallergenic thermoplastic rubber which additionally mitigates this shortcoming? Are they even aware of it at all?

    4. Plenty of labs will be quick to tell you they use benzyl alcohol as an antiseptic agent, but do they know that it is truly only effective under very specific controlled conditions? One of the strongest conditions being the pH level of oil - benzyl alcohol loses its antiseptic efficiency at a pH <5 or >7. Do they have the capabilities to control for this? We have our doubts. If you use a cheap testosterone product from a lesser lab, your bloodwork may indeed reflect that it contained active hormone. But we ask you, what could happen with longterm storage of such a product? Believe us, you will not want to inject it into your body!

    5. What preserving agents are other manufacturers using against g-negative bacteria - if they are even using them at all?
    Benzyl alcohol, while effective against g-positive bacteria, is not sufficient against g-negative bacteria which have a thicker cell membrane making them resistant to not only BA but many preserving agents in general. While we cannot disclose the specific technologies we use as part of our production secret, we guarantee we have the means and the will to use them in our oils.
    Neglecting the use of parabens, chlorobutanol, and other such agents clearly implies clandestine production, typically with the intent to sell as many products as possible with minimal expense - no longterm strategy of precautions. Whether or not a customer intends to use a product two or three years down the road is certainly of no concern to them, which poses a serious question of concern to consumers.
    So we have to reiterate: we have the industrial scale equipment and the technical prowess to ensure all of these standards - and plenty more we cannot disclose. But with that comes a greater cost than what you would find in lesser clandestine labs.

    Finally, it is ultimately up to you what you purchase and put inside your body. Whether the products you put inside your body are cheaper, and can include underdosed items and potential health risks, or of highest quality and proven through a rigorous, health-conscious process every time. Our established record of over 10 years and the professional quality we possess compared to the multitude of issues and infections found in smaller, cheaper, short-lived labs speaks for itself. Is it worth a few extra dollars? Thank you very much for your time...and may the force be with you!


    Click HERE for details about the store, ordering, payment, shipping, discounts, terms and conditions.
    Last edited by RThoads; 08-24-2018 at 04:36 PM.

  2. #2

  3. #3
    RThoads's Avatar
    Join Date
    Sep 2015
    Posts
    204
    Rep Power
    43
    Pharmacom labs tablets pressing process:

  4. #4
    RThoads's Avatar
    Join Date
    Sep 2015
    Posts
    204
    Rep Power
    43
    Pharmacom - Vials washing and sterilization:

  5. #5
    Moderator Skull's Avatar
    Join Date
    Dec 2014
    Posts
    1,199
    Rep Power
    78
    Now thats how an Intro is done. Well done RT. I have known this man for the last 5yrs. If anybody is going to represent Basicstero, id much rather see my close brother/friend who i know without a doubt is a very loyal straight shooter kinda guy. Glad to see your dpin this RT. Basicstero along with anyone else who deals with my big brotha RT will not regret it. I gladly welcome you to M&S gentlemen ......

  6. #6
    Disarm's Avatar
    Join Date
    Jun 2016
    Posts
    1,390
    Rep Power
    61
    Welcome! I have followed your posts on other boards. Definitely can say he's on guy who knows what he is doing. Plus, I know if skull likes him then he's a damn good guy.

  7. #7
    Member ThinkTank's Avatar
    Join Date
    May 2018
    Posts
    8
    Rep Power
    0
    Basictsero and pharmacom are as good as it gets to both reliable service and accurate products. Good stuff!

  8. #8
    RThoads's Avatar
    Join Date
    Sep 2015
    Posts
    204
    Rep Power
    43
    Thank you for the kind words -- I appreciate it!

  9. #9
    M&S Veteran
    Join Date
    Jul 2016
    Posts
    849
    Rep Power
    45
    Thinking of placing an order through the international site because of the great prices and I'm definitely a fan of Pharmacom. What may stop me is shipment from China. So not sure....

  10. #10
    RThoads's Avatar
    Join Date
    Sep 2015
    Posts
    204
    Rep Power
    43
    Quote Originally Posted by Kins View Post
    Thinking of placing an order through the international site because of the great prices and I'm definitely a fan of Pharmacom. What may stop me is shipment from China. So not sure....
    I replied to your PM.

    Also, keep in mind you have the options of shopping at:
    Basicstero EU Domestic Store
    and
    Basicstero US Domestic Store

  11. #11
    M&S Veteran
    Join Date
    Jul 2016
    Posts
    849
    Rep Power
    45
    Yes but +11.56 more per item I want for Euro. +27 more per item for US. Euro is much safer in my opinion than Asia and US the safest. However I'd like to gauge or hear from anyone who has recently received any pack or packs from Asia.

Similar Threads

  1. Basicstero has gone scammer!!!
    By Sr.Joseph.Dirt in forum Black Market Steroid Underground
    Replies: 63
    Last Post: 07-16-2017, 07:55 PM
  2. Basicstero
    By franchise24 in forum Sponsor Reviews
    Replies: 3
    Last Post: 02-23-2016, 01:57 PM
  3. Basicstero.com
    By Greatwhitehulk in forum Black Market Steroid Underground
    Replies: 5
    Last Post: 11-11-2015, 12:36 AM
  4. Basicstero.com
    By Greatwhitehulk in forum Black Market Steroid Underground
    Replies: 17
    Last Post: 11-08-2015, 03:28 PM
  5. Introduction
    By Like_a_Weed in forum Introduce Yourself
    Replies: 2
    Last Post: 12-28-2010, 04:18 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •